# Tag Archives: bounds

## Oil tanks and dipsticks

[If you're looking for the partial volume equations of a horizontal oil-tank, this article by Dan Jones has a nice write-up. Of course, you could just get someone to make a dipstick for you. My article only gives an overview of the problem, and how to approach it, from the perspective of a pure mathematician.]

This is the second post about real-life enquiries sent to my maths department, this one from a local engineer. Again, here’s the relevant section of the e-mail, partly to illustrate that, what might not at first seem an engaging problem for a pure mathematician, can turn out to be.

I need to calculate the capacity of a cylindrical tank laid horizontally with domed ends, in order to make an accurate dipstick. I would need to do the calculation several times in order to obtain capacities at varying levels.

This post is about how I went about finding a solution to this problem, and checking how good a solution it was. So now, if you happen to need a dipstick that fits these requirements (or just of a simple cylindrical tank), you can have one precision engineered to order. To continue the barge theme from the previous enquiry, you can also get a dipstick made for your barge’s diesel tank.